Model Railway - Baseboard Locations
Created | Updated Jul 10, 2013
![The shield of the Sport and Leisure faculty of the h2g2 University. The shield of the Sport and Leisure faculty of the h2g2 University.](https://h2g2.com/h2g2/blobs/uni_sportleisure_sm.jpg)
Introduction |
Glossary
Scales and Gauges |
Baseboard Locations |
The Trains
Themes |
Layout |
Scenery
One of the first difficulties encountered when creating a model railway is where to place the baseboard. The first objection to the project is often 'I don't have room for a train layout.' Some model railways have been built small enough that they fit neatly into a brief case, there are others that fill a large warehouse. Your best solution is probably some place in between.
The Train Corner
Often a corner can be found in a spare room, garage, basement, or even the attic. If you can manage this feat you will have the ideal situation, however you must make a strict rule that nothing is placed on your baseboard that is not part of the layout. There is a temptation to place items in a small clear area for 'just a minute' if you allow this your railway will soon become covered with junk and ruined.
Out of sight, but Ready to Run
There are several creative ways to build a layout that take very little space, except for when it in use. One idea that is commonly used is to build a box with low sides and fit it with either castors or sliding rails like a burrow drawer, it can then be stored under the bed between runs.
Another solution is to build a cabinet fastened to a wall. This can contain narrow shelves for your rolling stock, locomotives and other items that are not fastened securly to the baseboard. The front door will be just below your baseboard, with just enough space for the wires to be hidden. The door should have a hinge along its bottom edge. When the table is lowered the front edge is supported by a pair of folding legs. Be sure to remove all of the loose items before closing the 'door'.
The other possibility is to hang the entire baseboard from the ceiling with a system of cables and pulleys that allows it to be hoisted out of the way when not in use. This takes a little thought to arrange things so the table remains level while it is raised and lowered.
Overhead
Some railways have been built on a shelf that runs around a room above the top of the doors and windows. This can either be supported by shelf brackets mounted to the walls or hung by rods from the ceiling. Several rooms can be included if you cut small 'tunnels' through the walls (although this is not recommended if you are in a rental property).
Outdoors
There is also the possibility of building your railway outdoors in the garden. these layouts are usually the larger scales, as natural debris such as dirt and leaves, will interferer more as the scale is reduced. For someone who is also interested in plants this can be a very good option as most of the scenery can be live miniature vegetation. The actual construction of the layout differs from building indoors, but there are many sources available to guide you.
Railway Clubs
The other possibility is to join a model railway club or association. for a monthly dues you will be able to use their facilities and participate in the development of the layout. Many clubs exist each has one or more scales available, some use larger scales in the foreground with smaller scales near the rear of the layout to give a sense of perspective. Each club will have a different theme, so you should visit several before making a commitment.
Conclusion
If you want to become involved in model railways there are many possibilities, at least one of them can be found to meet your needs.