MIDI is an acronym standing for Musical Instrument Digital Interface and was invented in 1983. It is a standardised means of controlling synthesisers from an external source, such as another synthesiser or a sequencer. Though the ability to do this had already existed for some time via the Control Voltage Method.

The Evolution

Early synthesisers had already managed to use sequencing via Control Voltages but there were a few different types of control voltage used. For controlling the pitch of a sound a synthesier or sequencer would output a voltage. Roland and Moog synthesiser companies set a standard where voltage was directly proportional to pitch, whereas Korg and Yamaha set a standard where voltage was exponentially proportional to pitch. As such these two standards were not compatable with each other. Worse still was that several different methods were used for actually triggering a sound. Also if you wanted to control anything other than pitch and how long a note lasts, you would need to generate more control voltages, resulting in an excessive number of cables connected to each synthesiser. This method could also only play one note at once.

Roland invented DCB (Digital Control Bus) as a means of controlling a synthesier so it can play more than one note at once but this was only available on a few Roland synthesiers and was expensive to implement.

The Solution

In 1981 three engineers, each from a different synthesiser company were chatting at the National Association of Music Merchants (NAMM) trade show and hit upon the idea of solving this problem and allowing musicians more control. These engineers were: Dave Smith of Sequential Circuits, I. Kakehashi of Roland and Tom Oberheim of Oberheim Electronics.

The next few years saw engineers from all of the company working heavily on producing this new standard that would work with instruments from any company.

The system they came up with was based on the already existing local area network (LAN) protocol being used by networked computers.

In 1983 this was formally published as MIDI 1.0

The Revolution

Due to the way MIDI works it was now possible to transmit all kinds of information to a synthesiser and also store your playing. MIDI was able to capture everything from how which notes you play to how hard you play them and what sound you played it on. All this only needing one single cable connected between the synthesiser and controlling device. MIDI also achieved something that was previously impossible. It was now possible to chain a series of synthesisers together and have each one play a different part of the song. Each synthesiser would be assigned a 'channel' of which there could be 16 as a maximum. As such the MIDI sockets usually found on synthesisers are:

• IN - This socket receives MIDI data.
• THRU - This socket gives out the same MIDI input that goes into the IN socket
• OUT - This socket gives out MIDI data that the Synthesiser itself generates.

Sometimes Synthesisers give the option to use the MIDI out socket as a MIDI thru socket.

The ability to store tunes on disk resulted in the creation General MIDI and MIDI Files which was a standardisation of storage and playback of tunes on synthesisers.

The Continuation

Remarkably MIDI has never been updated since it's first release. MIDI 1.0 is still the standard that is used today. To date it has managed to handle controlling each new technology that has come along. This has seen it become as widely used as Microsoft Windows on the PC.

It is likely that MIDI will continue to be the connection of choice for many years to come. As synthesisers evolve it is likely that we will be controlling many new new parts of their workings via MIDI. One of the recent additions to MIDI connectivity is the use of MIDI via a USB (Universal Serial Bus) connection. This allows a greater ease in connecting the synthesiser to your computer, due to the now commonplace feature of USB ports.

In the future it may evolve into a more cordless connection to save connecting all the synths via wires, allowing greater freedom in the studio.